Punch Makita - professional tool
Among construction tools, the hammer drill is powerful and reliable, like all other products of this brand. It has much in common with a hammer drill, but some operations can only be performed by a Makita perforator due to its special device. In detail, the hammer drill can be compared to an automatic weapon and an impact drill. The low recoil of the tool and the high speed of operations make it irreplaceable.
What you need to know when choosing a rock drill
In addition to the functions that hammer drill high power, the Makita perforator is indispensable if you need:
- punch holes in reinforced concrete passing through steel reinforcement;
- using various forms of working heads, chisels, you can make an opening or a groove in a monolithic block.
Choose a hammer drill, guided by the technical parameters. The more powerful and heavier the tool is, the more work it will perform. Hammer drills Makita, having a power of 0.8-1.5 kW and a weight of 2-12 kg, are characterized by:
- power;
- the frequency of blows and their strength;
- the maximum diameter of the holes to be made;
- is there a reverse and adjustable rotation speeds;
- cartridge type;
- the presence of locks.
The choice of a tool for a specific nature of work is considered correct. Cope with tightening screws screwdriver, and the holes for hanging the strings in the apartment will be drilled with a percussion drill. The hammer drill is needed where slotting work in hard material prevails.
A professional tool from a well-known manufacturer cannot be cheap. However, the price of a Makita puncher depends on many indicators. So the leader of many ratings, the HR2470 model can be purchased for seven thousand, while the HR 5001c equipped with new options and functions is estimated at 45 thousand rubles.
The price of the tool can be significantly lower if the production site is located in China. These are the official assembly sites of the Makita company, but the assembly cost is decreasing, there are fewer control levels. You can find out where the perforator was made on the label where the country of manufacture will be marked:
- A - made in America;
- D - factories Dolmar, Germany;
- E - Japan:
- G - Great Britain;
- Y, K - China;
- R - Romania.
All legally supplied to the market perforators have an additional Russian mark on the passage of control - HCN.
Products collected in handicraft workshops differ in packaging, appearance, price. Consider examples of Makita punchers that have earned recognition.
Perforator Makita HR2450
The device has not left store shelves for more than 10 years, it is in demand and users respond only positively about it. At the same time, this is a relatively inexpensive model in the Makita puncher line. The package bundle is modest - in addition to a durable case, there is an additional handle, a depth gauge and instructions in Russian.
The tool has 3 functions:
- drilling - drill;
- hammer drilling - hammer drill;
- impact crushing - jackhammer.
By being equipped with an SDS plus drill chuck, the scope of work is limited by the attachments used.
The built-in electronics regulates the rotation speed by sensing the pressure on the trigger. The Makita HR2450 hammer drill is characterized by simplicity of process control and reliability. The use of 40 positions of angle attachments with which the tool works makes it a versatile person. According to reviews, such a tool in the hands of a professional has been working for several years, changing only consumables.
The release clutch provides slip during starting, preventing jerking. When the line is de-energized, the accidental start blocking system is activated.
The only drawback eliminated on the following models is the lack of anti-vibration protection.
Perforator Makita HR2450 X 8 (SDS +)
The unit is used for processing non-ferrous metals, steel and reinforced concrete. It has 3 modes of operation - hammering, drilling and hammering. The motor power of 0.78 kW provides an average load. The engine cooling system allows you to work more intensively even in dusty conditions. The unit can operate from the mains or an independent power source. Using the SDS + chuck, the tool works with chisels and crowns, drills and drills on all types of materials, including drywall.
The permissible drilling diameter is from 13 mm for steel to 32 for wood.
The trip clutch prevents kickback if seizure occurs. Rubberized handles dampen vibration and hold the tool comfortably in any position. The delivery set of the Makita HR2470 hammer includes 5 drills with a section of 8 mm.
Perforator Makita HR2470
The improved device resembles the beloved model HR2450, with a more powerful engine. In terms of its consumer qualities, the tool is in the lead in the 2016 rating. Dust protection is considered an advantage over other models. As a result, the tool has a long service life and a longer service life of the engine carbon brushes.
The Makita HR2470 hammer drill is equipped with a variable speed of rotation and impact, and a reverse.
The chisels are set at the desired angle, freeing the operator from control. In the future, the modernization of this tool is the creation of a backlight and the use of quick-release cartridges.
Perforator Makita HR4001c
The upgraded model of the rock drill increased the drilling efficiency by one third, and the working life increased. Modern design attracts the attention of the buyer. Comfortable grip due to the additional handle on the left helps to control the process and less fatigue. The hammer drill Makita HR 4001c works from the household network. The tool is heavy, 6.3 kg, and powerful 1.1 kW, effectively pierces building structures. The design uses an SDS max chuck, a depth gauge and an electronic speed control system.
Additional options used in the model:
- slide switch;
- soft start and shock protection when jammed;
- electronic control of rotation speed;
- vibration protection;
- safety clutch.
Two functions - impact and rotation with impact powerfully and effectively provide the process of destruction of structures, drill concrete with a crown, creating a passage in the wall up to 105 mm in cross-section.
It should be noted that this model is produced in the UK and China.
Rotary Hammer Makita HR3200c
As a result of the upgrade of the base model, the rock drill increased productivity by 30%. As a result of the reconstruction, the consumer qualities and the price of the Makita HR 3200 c hammer have increased. Now the model has improvements to the apparatus:
- SDS plus system cartridge conical;
- precise speed control;
- convenient switching to any of 3 operating modes;
- improved insulation of the armature, for work with heavy loads;
- "Soft hit" at idle;
- indicators of malfunction and wear of graphite brushes.
The reconstruction resulted in an efficient and productive tool. Weighing 4.4 kg, it provides an impact force of 5.5 J with a frequency of 1650-3300 beats per minute.The 850 W motor is equipped with a forced cooling system.
The very comfortable rotating handle provides a good grip for the operator. The main handle is closed, the trigger key can be locked for long-term operation.
Perforator Makita HR5001с
The best professional hammer drill in the rating of powerful tools is the Makita HR5001c hammer drill. He received 10 out of 10 points, despite the stated price, 34,320 rubles. The unit is designed for super-difficult work in its sector.
The hammer drill is characterized by:
- power - 1.5 kW;
- weight - 12 kg;
- speeds - 1;
- hole diameter in concrete with drilling - 50 mm, with a crown - 160 mm.
Users note the reliability of the rotary hammer when laying engineering gray. Warns users that a powerful machine must be held with two hands when working. Of the options, good regulation, vibration protection, and a wear indicator for graphite brushes are noted.
How to purchase consumables and spare parts for the Makita perforator
It is best to purchase spare parts from the official dealers of the Makita company. In this case, using a network of service centers and ordering spare parts via the Internet will save you from purchasing fakes. The hammer drills are guaranteed by the manufacturer for a year, and during this period any breakage of the tool is eliminated free of charge.