Water heater Electrolux improves living conditions in the country
A comfortable life largely depends on the availability of hot and cold water in the house. Electrolux water heater with electric and gas heating is presented by the Swedish company Electrolux. The company produces flow-through and storage devices of various capacities, horizontal and vertical design.
The main differences between Electrolux boilers
The purpose of the review is to provide an overview of products with electrical energy supply with the ewh product label. In gasified areas, it is advantageous to install an Electrolux water heater using a gas burner. Despite the expensive installation and the need to install an extractor hood, the operation of the heater will be more economical than that of an electric device.
If you need to install a small water heater under the sink, you need to buy a device marked U, a moisture-proof housing. For installation from above, a device with an O index is used.
If the need for hot water arises during the summer months, a built-in appliance can be installed. The company took into account the need of summer residents to make their life comfortable. Use a ruler instantaneous water heaters Electrolux can be a resident of a megalopolis and a village, provided that the load on the electrical networks allows the use of a powerful energy consumer.
Various models of water heaters include one or two heating elements with a total capacity of no more than 2 kW, which allows the use of household networks with a voltage of 220 V.
Water heater Electrolux EWH 50 Quantum pro
A compact model, fits in a cramped room, occupying a contour in the corner 38x38, 70 cm high.The Electrolux EWH 50 Quantum pro water heater with one 1.5 kW heating element works, heating the tank to 750 within 98 minutes.
The inner tank is made of special enamel, applied at 8500 in an atmosphere of inert gases. Such a coating has an expansion coefficient equal to the metal and does not crack and does not allow the development of focal corrosion. The metal thickness of the inner tank is 2 mm. The presence of a magnesium anode serves as an additional barrier to corrosion.
In order to ensure your safety, it is better to take a bath with the water heater turned off. This is not in the instructions, but experts advise.
The device has an electronic control panel, on which the knob sets the temperature of the hot water at the outlet. If we reduce the heating temperature to 55 degrees, we get economical energy consumption. In everyday life, hot water at a high temperature is used only for washing with disinfection. Is it worth heating the water in order to subsequently dilute it with cold water?
In emergencies, the Electrolux 50 liter water heater is protected by a break in the supply circuit:
- when you turn on the water heater without water;
- the pressure drop in the feedwater conduit is below 0.7 Ati;
- increase in pressure in the line over 6 Ati;
- blocking when the heating element overheats under a scale.
With all the positive qualities, the cost of the water heater is lower than other models with a volume of 50 liters.
Economical flat water heater Electrolux EWH 50
The device is designed to heat 50 liters of water to a temperature of 750 with an overpressure in the cold water line of 0.7 - 6.0 bar. The size of the Electrolux EWH 50 Centurio dl water heater is 860x433x255 ml with soft contours. The device is heated by two heating elements, 1 kW each. The total weight of the device is 12.2 kg.
The inner tank is made of austenitic steel by argon welding, which does not destroy the structure in the welded seam. Heating elements are covered with copper and copper-nickel sheath. To reduce corrosion, a magnesium alloy anode, a consumable, is mounted in the heating element.
The presence of two electrodes allows you to set up a fast heating mode and an economical one, up to 550 C. By the way, the economy mode is the main distinguishing feature of the model. Bacteria when reaching 500 die, and intensive scale deposition on the electrodes has not yet occurred. Heating elements have to be cleaned less often, less energy is consumed.
Effective insulation of the internal tank of the Electrolux water heater with a 2 cm layer of polyurethane foam makes the device more economical.
Protective functions are performed:
- thermostat;
- safety valve;
- RCD - with current leakage;
- dry heat protection;
- shutdown at low pressure in the supply network.
Compact water heater 50 liters with X-Heat application
The proposed model of the Electrolux EWH 50 Formax water heater uses heating elements of a new generation. "Sukhoi" heating element represents a design where each coil is enclosed in a flask and the heating element does not have direct contact with water. As a result, insoluble salts are not deposited on the surface of the element, and scale does not appear. Corrosion protection of metal is made with special glass-phosphor enamel and the applied magnesium electrode adds effect. The set includes 2 heating elements. If one fails, the second continues to heat. Replacing a damaged part is straightforward.
Positive functional qualities of the Electrolux water heater:
- installation versatility - the device can be installed horizontally and vertically;
- there is a control panel with the ability to regulate temperature and there is an "ECO" function;
- safety is ensured by a safety valve, RCD, thermostat, triggered at 850 FROM.
Heating time for a full tank of water to 750 will be 108 minutes when elements with a capacity of 0.8 and 1.2 kW are turned on.
Accumulative water heater Electrolux EWH 80 Royal
An electric boiler with a stainless steel inner tank and nickel-plated heating elements will provide hot water for a large family. Argon welding ensures long-term operation of the inner vessel. There are 2 heating elements installed in the tank, for 1 and 2 kW, but they work alternately and the load on the network does not exceed 2 kW. The shape of the Electrolux EWH 80 Royal water heater is flat, dimensions 493x290x990 mm. Water heating time up to 750 - 2 hours 10 minutes.
The device is equipped with protection and control devices:
- water temperature sensor;
- protection against "dry" heating of electrodes;
- power cut-off at pressure above and below nominal (0.7-7.0 bar):
- safety valve;
- RCD.
A convenient control panel allows you to set the heater to one of three heating modes and control the operation of the device.
The heater is mounted vertically to the wall with anchors. The installation and debugging of the operating mode must be entrusted to the service center or carried out in accordance with the operating instructions. When purchasing, check the availability of components according to the list.
Technical characteristics of the water heater Electrolux 30 liters
A small hot water heater will become an indispensable assistant in summer cottage life. The device with dimensions of 43.3x25.5x54.6 cm fits in a niche, heats water up to 750 in 50 minutes. Device weight 9 kg, easy installation.
The Electrolux EWH 30 Royal water heater, despite its small size, has good functionality:
- stainless steel inner tank;
- two heating elements with a capacity of 1 kW are made of copper with nickel plating;
- there is a mode of using one element and full power;
- thermostat, "dry" protection, safety valve, RCD - protective equipment.
The compact device is indispensable in the summer in an apartment building. It is easy to integrate it into the water supply scheme and store it until next summer.
All the water heaters in question have a 7-year warranty. The cost of devices with enamelled housings is less than with stainless austenitic steel. The price is influenced by the volume of the heater and additional equipment.